Tube, pipe and beam processing
Tube, Pipe and Beam Processing
Tube, pipe and structural profiles cut and prepared for your frames, supports and assemblies.
Tube, Pipe and Beam Preparation
Frame and rail components, equipment stands and skids, brace sets and platform parts are cut and coped from your parts list, with saddle cuts, cope joints, holes and notches coming off one program.
Beams run on a beamline that cuts to length, copes, bevels and marks in one automated pass, with drilling available in the same setup. Send the parts list with profile sizes; cutting and coping are the preparation, and tube bending is not an operation we run.
- Round tube 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
- Profile height to 18 in, width to 41 in, stock to 60 ft
- Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
- Cutting, coping, beveling, drilling, etching and marking
Joints that close without hand fitting
You order a profile set that goes together, not a pile of square-cut ends to trim on the bench. Every piece of the parts list comes off the same program, so coped ends and layout marks arrive ready for welding.
- Max round tube OD
- 6 inMax round tube OD
- Stock length
- 60 ftStock length
- Max profile material
- 3-1/8 inMax profile material
Cutting and coping are the preparation, and the assembly is built here when you want it welded too.
The profiles we process
Structural and mechanical profiles, cut and coped to a programmed shape.
- Round tube and pipe
- Square and rectangular tube
- Angle, channel and flat bar
- I and H sections, angle and T-profile
- Stock lengths to 60 ft
- Wall thickness 1/32 in to 5/8 in on tube
Send the parts list with profile sizes, and the profile ends are quoted as cut, coped and marked.
The machine that runs the work
- Tube
- Round 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
- Profiles
- I and H sections, channel, angle, T-profile, square and rectangular tube
- Size limits
- Profile height to 18 in, width to 41 in, stock to 60 ft
- Thickness
- Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
- Operations
- Cutting, coping, beveling, drilling, etching and marking
Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Dragon A400 and Voortman V807 beamline.
Request a quote for your next project
Send the parts list with profile sizes and quantities, and the set is quoted as processed.
Industries We Serve
The same coped profile shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.
Industrial Operations
Machine frames, railings and stands cut and coped so assemblies sit square.
Industrial plants and equipmentCommercial Construction
Structural supports, saddles and frame parts cut and marked for welding.
Commercial constructionManufacturing and OEMs
Tube and profile sets for equipment builds, cut to a parts list.
Manufacturing and OEMsData Centers
Pipe supports, rack frames and skid members for equipment rooms.
Data centers
Need KorFab for your next project?
Profiles are processed in Phoenix, Arizona. Frame packages for Mesa and the East Valley are cut and delivered to schedule, structural parts for Tucson are fabricated here and shipped south, and northern Arizona orders for Flagstaff are quoted with freight from the shop.