Tube, pipe and beam processing · Prescott
Tube, Pipe and Beam Processing for Prescott
Tube, pipe and structural profiles cut and coped for your frames and assemblies, fabricated in Phoenix for Prescott projects.
Profile Sets for Prescott Fabricators
Prescott work runs from custom residential steel through light commercial and small plant projects, so the same shop is asked for a decorative bracket set and a structural connection plate in the same week. Quantities are usually small and the fit is checked against a drawing before anything ships.
Frame and rail components, equipment stands, skids, brace sets and platform parts are cut and coped from your parts list, with saddle cuts, cope joints, holes and notches coming off one program. Beams run on a beamline that cuts to length, copes, bevels and marks in one automated pass.
Round tube from 0.75 in to 6 in OD, square, rectangle, angle and channel from 1 in to 4 in, profile height to 18 in and stock to 60 ft are all within the published range. Cutting and coping are the preparation; the assembly is built here when you want it welded too.
- Round tube 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
- Profile height to 18 in, width to 41 in, stock to 60 ft
- Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
- Cutting, coping, beveling, drilling, etching and marking
Joints that close without hand fitting
You order a profile set that goes together, not a pile of square-cut ends to trim on the bench. Every piece of the parts list comes off the same program, so coped ends and layout marks arrive ready for welding.
- Max round tube OD
- 6 inMax round tube OD
- Stock length
- 60 ftStock length
- Max profile material
- 3-1/8 inMax profile material
Cutting and coping are the preparation, and the assembly is built here when you want it welded too.
The profiles we process
Structural and mechanical profiles, cut and coped to a programmed shape.
- Round tube and pipe
- Square and rectangular tube
- Angle, channel and flat bar
- I and H sections, angle and T-profile
- Stock lengths to 60 ft
- Wall thickness 1/32 in to 5/8 in on tube
Send the parts list with profile sizes, and the profile ends are quoted as cut, coped and marked.
The machine that runs the work
- Tube
- Round 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
- Profiles
- I and H sections, channel, angle, T-profile, square and rectangular tube
- Size limits
- Profile height to 18 in, width to 41 in, stock to 60 ft
- Thickness
- Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
- Operations
- Cutting, coping, beveling, drilling, etching and marking
Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Dragon A400 and Voortman V807 beamline.
Request a quote for your next project
Send the parts list with profile sizes and quantities for a Prescott quote.
Industries We Serve
The same coped profile shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.
Industrial Operations
Machine frames, railings and stands cut and coped so assemblies sit square.
Industrial plants and equipmentCommercial Construction
Structural supports, saddles and frame parts cut and marked for welding.
Commercial constructionManufacturing and OEMs
Tube and profile sets for equipment builds, cut to a parts list.
Manufacturing and OEMsData Centers
Pipe supports, rack frames and skid members for equipment rooms.
Data centers
Profile work for Prescott
Send the parts list with profile sizes, wall thickness and quantities, plus the date the set is needed. Cut, coped and marked parts are quoted as prepared, and welding is quoted with them when the assembly is ordered too.
Parts are cut and welded in Phoenix and delivered to Prescott by freight, quoted with the order. Small orders travel as one shipment so a bracket set and its weldments arrive together.
Fabricated in Phoenix, Arizona, for Prescott projects. Delivery is reviewed for each order; see delivery.