Phoenix, ArizonaNationwide Delivery
KorFab component fabrication in Phoenix, Arizona
Capped steel pipe components with welded domed ends on the bench at KorFab

Tube, pipe and beam processing · Tempe

Tube, Pipe and Beam Processing for Tempe Fabrications

Coped tube and structural profiles cut to your parts list in Phoenix, for Tempe frame, rail and equipment work.

Profile Sets Cut to a Parts List

Tempe work tends to be layout-driven: a frame with several joints, a rail run, a stand with four legs and braces. Every piece is cut and coped from the same program, and layout marks are etched so the assembly goes together in the order the drawing sets out.

Round tube from 0.75 in to 6 in OD and square, rectangle, angle and channel from 1 in to 4 in run on the tube processor, while I and H sections run on the beamline. Assemblies can be welded here once the set is cut, which keeps one team responsible for how the joints fit.

Stacked steel channels with pre-cut holes, processed and ready for assembly at the KorFab shop
  • Round tube 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
  • Profile height to 18 in, width to 41 in, stock to 60 ft
  • Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
  • Cutting, coping, beveling, drilling, etching and marking
Benefits

Joints that close without hand fitting

You order a profile set that goes together, not a pile of square-cut ends to trim on the bench. Every piece of the parts list comes off the same program, so coped ends and layout marks arrive ready for welding.

Max round tube OD
6 inMax round tube OD
Stock length
60 ftStock length
Max profile material
3-1/8 inMax profile material

Cutting and coping are the preparation, and the assembly is built here when you want it welded too.

Bundled steel pipe cut to length and banded for delivery at the KorFab shop
Materials

The profiles we process

Structural and mechanical profiles, cut and coped to a programmed shape.

  • Round tube and pipe
  • Square and rectangular tube
  • Angle, channel and flat bar
  • I and H sections, angle and T-profile
  • Stock lengths to 60 ft
  • Wall thickness 1/32 in to 5/8 in on tube

Send the parts list with profile sizes, and the profile ends are quoted as cut, coped and marked.

Machine and capacity

The machine that runs the work

Tube
Round 0.75 in to 6 in OD; square, rectangle, angle and channel 1 in to 4 in
Profiles
I and H sections, channel, angle, T-profile, square and rectangular tube
Size limits
Profile height to 18 in, width to 41 in, stock to 60 ft
Thickness
Tube wall 1/32 in to 5/8 in; profile material 1/8 in to 3-1/8 in
Operations
Cutting, coping, beveling, drilling, etching and marking

Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Dragon A400 and Voortman V807 beamline.

Beam processing on the Voortman V807 beamline: a structural profile at the cutting and coping station
The machine that cuts and copes them: the Voortman V807 beamline, cutting, coping, beveling and marking each profile in one automated pass.

Request a quote for your next project

Send the parts list with joint details, and the cut, coped and marked set is quoted as processed.

Industries We Serve

The same coped profile shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.

Service areas

Tube, Pipe and Beam Processing by city

Start a project

Ordering a profile set for Tempe

Send the parts list with profile sizes, wall thickness, quantity, the connection detail for each joint and the date you need the set. Drawings that show cope orientation save a round of questions before the quote goes out.

Processing happens in Phoenix and sets ship to Tempe. Welded frames are built from the same cut program and ship as units.

Profiles are processed at the Phoenix, Arizona shop and delivered to Tempe. Welded frames are built here through welding and assembly.