Phoenix, ArizonaNationwide Delivery
KorFab component fabrication in Phoenix, Arizona
Press brake punch and die bending a heavy steel plate at the KorFab shop

CNC press brake forming · Scottsdale

CNC Bending and Forming for Scottsdale

Bent mounting brackets, channels and support covers for Scottsdale architectural details, fabricated as components in Phoenix.

Formed Support Parts With the Visible Face Marked

A concealed bracket and an exposed return need different information on the drawing even when both start as a flat blank. Mark the visible face, bend direction, inside radius and finished dimensions. Include the mating component so the quote is based on how the support must fit, not on a generic angle.

Specify mirrored brackets and required quantities separately. Coating thickness, masked surfaces and any particular appearance requirement should be raised before forming is quoted. This page addresses formed support components; it does not replace the existing architectural-panel design and specification pages.

Stack of bent steel L-brackets formed at the KorFab shop
  • Press force 135 metric tons (approx. 149 US tons)
  • Bend length 3,000 mm (118 in), 2,550 mm (100.4 in) between frames
  • Synchronized rams, CNC crowning and CNC backgauge
  • Steel, stainless steel and aluminum
Benefits

Bends that repeat across the run

You order parts that fit together on the bench, not parts that have to be pushed into place. Ram position, backgauge and crowning are set once and repeated for every piece, so a multi-bend part holds its sequence from the first article to the last.

Press force
135 tPress force
Bend length
3,000 mmBend length
Between frames
2,550 mmBetween frames

Forming is planned with the cutting and welding around it, not quoted as a standalone operation.

Press brake punch pressing a laser-cut steel blank into the V-die to form a bend
Materials

The materials we form

Blanks in the common fabrication grades are formed on the press brake.

  • Carbon steel
  • Stainless steel
  • Aluminum
  • Light gauge sheet through plate
  • Blanks cut here or supplied by you
  • Bend details confirmed per part at quote

Send the material, thickness and bend detail. Anything beyond the brake is quoted on another machine rather than guessed at.

Machine and capacity

The machine that runs the work

Machine
CNC hydraulic press brake
Press force
135 metric tons (approx. 149 US tons)
Bend length
3,000 mm (118 in), 2,550 mm (100.4 in) between frames
Control
Synchronized rams, CNC crowning and CNC backgauge
Materials
Steel, stainless steel, aluminum

Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Mitsubishi ADIRA PA 13530.

Mitsubishi ADIRA PA 13530 CNC press brake, the machine that forms the parts at KorFab
The machine that forms them: the Mitsubishi ADIRA PA 13530 press brake, 135 metric tons over a 3,000 mm (118 in) bend length.

Request a quote for your next project

Send the drawings, quantities and requirements for your Scottsdale components.

Industries We Serve

The same formed part shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.

Service areas

Metal Bending and Forming by city

Start a project

Quote Your Scottsdale Components

Provide the finished-part drawing, material, thickness, bend detail, handed quantities and finish requirements. Forming takes place in Phoenix, with delivery to Scottsdale agreed for the order.

Fabricated in Phoenix, Arizona, for Scottsdale projects. Delivery is reviewed for each order; see delivery.