Phoenix, ArizonaNationwide Delivery
KorFab component fabrication in Phoenix, Arizona
Press brake punch and die bending a heavy steel plate at the KorFab shop

CNC press brake forming · Prescott

CNC Bending and Forming for Prescott

Brackets, channels and covers formed to your drawings in Phoenix and delivered to Prescott projects.

Formed Parts for Prescott Projects

Prescott work runs from custom residential steel through light commercial and small plant projects, so the same shop is asked for a decorative bracket set and a structural connection plate in the same week. Quantities are usually small and the fit is checked against a drawing before anything ships.

Brackets, cleats, channels, rails, covers and enclosure parts are formed from blanks cut in the same shop or supplied by you. A CNC press brake sets ram position, backgauge and crowning once and repeats them for the run, so a multi-bend part holds its sequence from the first article to the last.

The brake carries 135 metric tons (approx. 149 US tons) over a 3,000 mm (118 in) bend length, with 2,550 mm (100.4 in) between the frames, forming steel, stainless steel and aluminum.

Stack of bent steel L-brackets formed at the KorFab shop
  • Press force 135 metric tons (approx. 149 US tons)
  • Bend length 3,000 mm (118 in), 2,550 mm (100.4 in) between frames
  • Synchronized rams, CNC crowning and CNC backgauge
  • Steel, stainless steel and aluminum
Benefits

Bends that repeat across the run

You order parts that fit together on the bench, not parts that have to be pushed into place. Ram position, backgauge and crowning are set once and repeated for every piece, so a multi-bend part holds its sequence from the first article to the last.

Press force
135 tPress force
Bend length
3,000 mmBend length
Between frames
2,550 mmBetween frames

Forming is planned with the cutting and welding around it, not quoted as a standalone operation.

Press brake punch pressing a laser-cut steel blank into the V-die to form a bend
Materials

The materials we form

Blanks in the common fabrication grades are formed on the press brake.

  • Carbon steel
  • Stainless steel
  • Aluminum
  • Light gauge sheet through plate
  • Blanks cut here or supplied by you
  • Bend details confirmed per part at quote

Send the material, thickness and bend detail. Anything beyond the brake is quoted on another machine rather than guessed at.

Machine and capacity

The machine that runs the work

Machine
CNC hydraulic press brake
Press force
135 metric tons (approx. 149 US tons)
Bend length
3,000 mm (118 in), 2,550 mm (100.4 in) between frames
Control
Synchronized rams, CNC crowning and CNC backgauge
Materials
Steel, stainless steel, aluminum

Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Mitsubishi ADIRA PA 13530.

Mitsubishi ADIRA PA 13530 CNC press brake, the machine that forms the parts at KorFab
The machine that forms them: the Mitsubishi ADIRA PA 13530 press brake, 135 metric tons over a 3,000 mm (118 in) bend length.

Request a quote for your next project

Send the blank or flat pattern with bend details and the Prescott quantity.

Industries We Serve

The same formed part shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.

Service areas

Metal Bending and Forming by city

Start a project

Forming for Prescott

Send the material, thickness and bend detail with the quantity. Anything beyond the brake is quoted on another machine rather than guessed at.

Parts are cut and welded in Phoenix and delivered to Prescott by freight, quoted with the order. Small orders travel as one shipment so a bracket set and its weldments arrive together.

Fabricated in Phoenix, Arizona, for Prescott projects. Delivery is reviewed for each order; see delivery.