Phoenix, ArizonaNationwide Delivery
KorFab component fabrication in Phoenix, Arizona
Press brake punch and die bending a heavy steel plate at the KorFab shop

CNC press brake forming · Gilbert

CNC Bending and Forming for Gilbert

Press-brake formed mounting brackets, channels and cover parts for Gilbert equipment enclosures, made to drawing in Phoenix.

Formed Channels and Brackets That Preserve Access

For a formed bracket beside AC or pool equipment, mark the finished envelope and any clearance needed for a removable panel or service opening. Show bend direction, inside dimensions, hole locations and handed versions. Those details let the forming review address the actual component rather than assume a standard angle.

Include the finished drawing alongside the flat pattern and identify the visible face and finish. KorFab reviews bend feasibility against the material, thickness and tooling. The enclosure layout, equipment clearances and installation remain with the buyer; this is component fabrication rather than a complete enclosure design service.

Stack of bent steel L-brackets formed at the KorFab shop
  • Press force 135 metric tons (approx. 149 US tons)
  • Bend length 3,000 mm (118 in), 2,550 mm (100.4 in) between frames
  • Synchronized rams, CNC crowning and CNC backgauge
  • Steel, stainless steel and aluminum
Benefits

Bends that repeat across the run

You order parts that fit together on the bench, not parts that have to be pushed into place. Ram position, backgauge and crowning are set once and repeated for every piece, so a multi-bend part holds its sequence from the first article to the last.

Press force
135 tPress force
Bend length
3,000 mmBend length
Between frames
2,550 mmBetween frames

Forming is planned with the cutting and welding around it, not quoted as a standalone operation.

Press brake punch pressing a laser-cut steel blank into the V-die to form a bend
Materials

The materials we form

Blanks in the common fabrication grades are formed on the press brake.

  • Carbon steel
  • Stainless steel
  • Aluminum
  • Light gauge sheet through plate
  • Blanks cut here or supplied by you
  • Bend details confirmed per part at quote

Send the material, thickness and bend detail. Anything beyond the brake is quoted on another machine rather than guessed at.

Machine and capacity

The machine that runs the work

Machine
CNC hydraulic press brake
Press force
135 metric tons (approx. 149 US tons)
Bend length
3,000 mm (118 in), 2,550 mm (100.4 in) between frames
Control
Synchronized rams, CNC crowning and CNC backgauge
Materials
Steel, stainless steel, aluminum

Figures are the manufacturer’s published specifications for the installed machine. Full breakdown: Mitsubishi ADIRA PA 13530.

Mitsubishi ADIRA PA 13530 CNC press brake, the machine that forms the parts at KorFab
The machine that forms them: the Mitsubishi ADIRA PA 13530 press brake, 135 metric tons over a 3,000 mm (118 in) bend length.

Request a quote for your next project

Send the drawings, quantities and requirements for your Gilbert components.

Industries We Serve

The same formed part shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.

Service areas

Metal Bending and Forming by city

Start a project

Quote Your Gilbert Components

Send the finished drawing, flat pattern if available, bend angles, material, thickness, handed quantities and finish. Forming is in Phoenix and Gilbert delivery is agreed with the order.

Fabricated in Phoenix, Arizona, for Gilbert projects. Delivery is reviewed for each order; see delivery.