Welding and assembly · Tempe
Order completed frames, equipment supports and bracket assemblies for Tempe facilities, cut, formed and welded in Phoenix.
For a support that meets an existing enclosure or building interface, supply the complete assembly drawing and the dimensions it must meet. Identify the joints, mounting points, component orientation and any access clearance. A set of separate part files does not establish how the finished unit must fit. State whether the order is for a loose cut-and-coped kit or a welded unit, and include weld and finish requirements. KorFab reviews the shop fabrication scope; site measurement, engineering and installation remain with the project team. This is an assembly-ordering path, not another general CAD-submission page.
Flat-bar arms are cut, formed and welded to a box-section base so the bracket arrives as one part that mounts straight on. The hole positions come from your drawing, and the same bracket can be made as a single set or a batch.
Plate bases, tube uprights and gussets welded into one unit that holds equipment at the height the drawing calls for. Mounting holes and cut-outs are made when the parts are cut, so the finished stand does not need drilling later.
Frames built from cut and coped profiles, welded square and marked for the parts that bolt to them. Fabricated light fixture components produced for an interior build sit in this group: welded steel frames that carry the finished fixture.
Running the same assembly again? Repeat production is quoted from the original drawings, so a fixture made for the part is set up the same way on the next run.
An assembly is only as good as the parts that go into it. Cutting, forming and welding in one shop settles the fit-up on the bench, not on site.
Outlines, holes and slots are cut from the approved drawing, with part numbers and bend lines marked in the cut. Sheet runs on the fiber laser; heavier plate on the five-axis plasma table.
Blanks go to the CNC press brake, where ram position and backgauge are set once and repeated across the batch, so the last bracket takes the same bend as the first.
Tube and structural sections are cut and coped on the tube and beam lines, so joints close without grinding. Parts are checked for square on the bench before welding, with a fixture holding repeat assemblies.
Manual MIG covers one-off assemblies, tight access and out-of-position joints. Repeat welds run on the cobot cell, running the same programmed path on every part in the batch.
Coating requirements are raised at quoting and carried out by our finishing partners. KorFab does not run a coating line.
Send the drawings, quantities and requirements for your Tempe components.
The same welded assembly shows up differently by sector. These are the industries we fabricate for and what the work looks like in each.
Frames, stands and guards welded square so machinery drops into place.
Industrial plants and equipmentWelded sub-assemblies and bracket sets produced to print.
Manufacturing and OEMsEquipment skids, supports and bracket sets assembled as single units.
Data centersWelded supports and saddles fabricated from the project drawings.
Commercial constructionSend the assembly drawing, individual part details, material, weld callouts, quantity and required date. Assemblies are fabricated in Phoenix; transport to Tempe is reviewed with the order.
No. Fabrication takes place at the Phoenix, Arizona shop. Tempe is a service area; delivery, handling and the achievable date are reviewed for each order.
The drawings, the material and thickness, the quantity, the date you need the assemblies, and any weld or finish requirement the project specifies. With those details the scope, fixture needs and schedule are reviewed together.
Yes. Cutting, forming and welding run in the same shop, so the parts for an assembly are produced and welded on one order instead of arriving from separate suppliers.
Repeat assemblies are quoted from the original drawings. Where a fixture was made for the part, the next run is set up from it and the parts are made the same way.
Assemblies are fabricated in Phoenix, Arizona, for Tempe projects. Delivery and handling are reviewed per order; see delivery.
Send the assembly drawing, individual part details, material, weld callouts, quantity and required date. Assemblies are fabricated in Phoenix; transport to Tempe is reviewed with the order.
