Large Part Metal Fabrication in Glendale
When your part or plate is beyond the practical capacity of a small fabrication shop, KorFab runs large shape processing and connected fabrication from Phoenix.
When a Small Shop Is Not Enough
Some parts are simply too large, too heavy, or too complex for a small fabrication shop to handle well. The plate is too big for the table. The beam is too long for the saw. The assembly needs a cutting, forming, and welding sequence that a small shop cannot coordinate.
That is the work KorFab is set up for. Our large shape processing equipment handles plates up to 6 by 12 feet, and our beam line processes full 60 foot material. When a part needs that capacity, send the dimensions and requirements and we will confirm the fit.
Large Shape Processing and Connected Work
Large parts rarely stop at cutting. A big plate often gets formed, welded into an assembly, or laser cut for detail after the plasma cut. KorFab runs those steps in the same Phoenix facility, so a large part does not bounce between vendors to get finished.
For five axis work, our five axis plasma cutting and machining system handles contour bevels, drilling, tapping, and milling in a single setup.
What to Send
Send the overall dimensions, the material, the thickness, the quantity, and a drawing or sketch. If the part has a weight or handling consideration, note that too. We will review the part against our equipment and tell you whether we can run it, and how.
Serving Glendale From Phoenix
KorFab fabricates in Phoenix and delivers to Glendale. Large parts ship palletized and protected, and we coordinate freight for oversized work. We ship nationwide from the same facility.
Verified Large Shape Processing Equipment Facts
- Arc Cut Pro 30D-612 Plasma Cutting Machine: Cuts plates up to 6ft x 12ft (1.82m x 3.65m)
- Voortman V807 Beamline: Handles full 60ft (18.288m) length material
- Large Shape Processing
- Phoenix metro areas served: Phoenix, Scottsdale, Tempe, Mesa, Chandler, Gilbert, Glendale, Peoria, and surrounding areas
Have a Large Part to Fabricate?
Send the dimensions, drawing, material, quantity, and project requirements. We will review the part and confirm whether our equipment handles it.